Web Parameters - AudioCodes Mediant 4000 SBC User Manual

Parameter
Local Users Table
Local Users
configure system >
user
[WebUsers]
Additional Management Interfaces Table
Additional Management
Interfaces
configure system >
additional-mgmt-if
[AdditionalManagementInterf
aces]

60.1.2 Web Parameters

The Web parameters are described in the table below.
Parameter
Enable web access from all interfaces
web-access-from-all-interfaces
[EnableWebAccessFromAllInterfaces]
User's Manual
WebAccessList_0 = 10.13.2.66
WebAccessList_1 = 10.13.77.7
For a description of the parameter, see ''Configuring Web and
Telnet Access List'' on page 79.
The table defines management users.
The format of the ini file table parameter is as follows:
[ WebUsers ]
FORMAT WebUsers_Index = WebUsers_Username,
WebUsers_Password, WebUsers_Status,
WebUsers_PwAgeInterval, WebUsers_SessionLimit,
WebUsers_CliSessionLimit, WebUsers_SessionTimeout,
WebUsers_BlockTime, WebUsers_UserLevel,
WebUsers_PwNonce, WebUsers_SSHPublicKey;
[ \WebUsers ]
For more information, see Configuring Management User Accounts
on page 69.
The table defines additional management interfaces.
The format of the ini file table parameter is as follows:
[ AdditionalManagementInterfaces ]
FORMAT AdditionalManagementInterfaces_Index =
AdditionalManagementInterfaces_InterfaceName,
AdditionalManagementInterfaces_TLSContextName,
AdditionalManagementInterfaces_HTTPSOnly;
[ \AdditionalManagementInterfaces ]
For more information, see Configuring Additional Management
Interfaces on page 67.
Table 60-2: Web Parameters
Enables Web access from any of the device's IP network
interfaces. The feature applies to HTTP and HTTPS
protocols.

[0] = (Default) Disable – Web access is only through the
OAMP interface.

[1] = Enable - Web access is through any network
interface.
Note:

For the parameter to take effect, a device reset is
required.

Instead of using this parameter, you can use the
Additional Management Interfaces table to assign
specific IP network interfaces for management interfaces
804
Mediant 4000 SBC
Description
Description
Document #: LTRT-40203