Tls Parameters - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter
settings > srtp-state-behavior-
mode
[ResetSRTPStateUponRekey]

60.5.4 TLS Parameters

The Transport Layer Security (TLS) parameters are described in the table below.
Parameter
TLS Contexts Table
TLS Contexts
configure system > tls #
[TLSContexts]
TLS Client Re-Handshake
Interval
configure network/security-
settings/tls-re-hndshk-int
[TLSReHandshakeInterval]
Version 7.2
between the device and a server when a new SRTP key is generated
upon a SIP session expire. You can also configure this functionality
per specific calls, using IP Profiles
(IpProfile_ResetSRTPStateUponRekey). For a detailed description of
the parameter and for configuring this functionality in the IP Profiles
table, see ''Configuring IP Profiles'' on page 418.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Table 60-25: TLS Parameters
Defines SSL/TLS certificates.
The format of the ini file table parameter is as follows:
[ TLSContexts ]
FORMAT TLSContexts_Index = TLSContexts_Name,
TLSContexts_TLSVersion, TLSContexts_DTLSVersion,
TLSContexts_ServerCipherString,
TLSContexts_ClientCipherString, TLSContexts_RequireStrictCert,
TLSContexts_OcspEnable, TLSContexts_OcspServerPrimary,
TLSContexts_OcspServerSecondary,
TLSContexts_OcspServerPort,
TLSContexts_OcspDefaultResponse, TLSContexts_DHKeySize;
[ \TLSContexts ]
For more information, see ''Configuring TLS Certificate Contexts''
on page 103.
Defines the time interval (in minutes) between TLS Re-
Handshakes initiated by the device.
The interval range is 0 to 1,500 minutes. The default is 0 (i.e., no
TLS Re-Handshake).
843
60. Configuration Parameters Reference
Description
Description
Mediant 4000 SBC