Voip Interfaces For Combined Application Types - AudioCodes Mediant 4000 SBC User Manual

Session border controller

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

All other parameters are set to their respective default values. The NTP application

remains with its default application types.

11.5.3.3 VoIP Interfaces for Combined Application Types

This example describes the configuration of multiple interfaces for the following

applications:

One interface for the OAMP application.

Interfaces for Call Control and Media applications, where two of them are IPv4

interfaces and one is an IPv6 interface.

IP Interfaces table:

Table 11-10: Example of VoIP Interfaces of Combined Application Types in IP Interfaces table

Static Routes table: A routing rule is required to allow remote management from a

host in 176.85.49.0/24:

The NTP application is configured (through the ini file) to serve as OAMP applications:

EnableNTPasOAM = 1

DiffServ table:

Layer-2 QoS values are assigned:

Layer-3 QoS values are assigned:

User's Manual

Prefix Length

200.200.85.14

200.200.86.14

2000::1:200:200:86:1

Table 11-11: Example of Static Routes Table

Prefix Length

For packets sent with DiffServ value of 46, set VLAN priority to 6

For packets sent with DiffServ value of 40, set VLAN priority to 6

For packets sent with DiffServ value of 26, set VLAN priority to 4

For packets sent with DiffServ value of 10, set VLAN priority to 2

For Media Service class, the default DiffServ value is set to 46

For Control Service class, the default DiffServ value is set to 40

Mediant 4000 SBC

192.168.11.1

V6CntrlMedia

192.168.0.10

Document #: LTRT-40203

Mediant 4000b sbc