AudioCodes Mediant 4000 SBC User Manual page 655

User's Manual
4. Open the Software Upgrade wizard:
•
Toolbar: From the Actions drop-down menu, choose Software Upgrade.
•
Navigation tree: Setup menu > Administration tab > Maintenance folder >
Software Upgrade.
5. Click Start Software Upgrade; the wizard starts, prompting you to load a .cmp file:
Note:
•
The Hitless Upgrade and System Reset Upgrade options appear only if the device
is configured for HA.
•
At this stage, you can quit the Software Upgrade wizard without having to reset
the device, by clicking Cancel. However, if you continue with the wizard and start
loading the cmp file, the upgrade process must be completed with a device reset.
6. Click Browse, and then navigate to and select the .cmp file.
Version 7.2
Figure 39-1: Starting Software Upgrade Wizard
655
39. Software Upgrade Wizard
Mediant 4000 SBC