Configuring Web And Telnet Access List - AudioCodes Mediant 4000 SBC User Manual

Session border controller
Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

User's Manual
6.11

Configuring Web and Telnet Access List

The Access List table lets you restrict access to the device's management interfaces (Web,
Telnet and SSH) by specifying IP addresses (up to ten) of management clients that are
permitted to access the device. Access to the device's management interfaces from
undefined IP addresses is denied. If you don't specify any IP addresses, this security
feature is inactive and the device can be accessed from any IP address.
The following procedure describes how to configure the Access List through the Web
interface. You can also configure it through ini file (WebAccessList_x).
Note:
Configure the IP address of the computer from which you are currently logged into
the device as the first authorized IP address in the Access List. If you configure
any other IP address, access from your computer will be immediately denied.
If you configure network firewall rules in the Firewall table (see ''Configuring
Firewall Rules'' on page 165), you must configure a firewall rule that permits traffic
from IP addresses configured in the Access List table.
To add IP addresses to the Access List:
1.
Open the Access List table (Setup menu > Administration tab > Web & CLI folder >
Access List).
2.
In the 'Add an authorized IP address' field, configure an IP address, and then click
Add New Entry; the IP address is added to the table.
If you have configured IP addresses in the Access List and you no longer want to restrict
access to the management interface based on the Access List, delete all the IP addresses
in the table, as described in the following procedure.
Note:
of the computer from which you are currently logged into the device, last; otherwise,
access from your computer will be immediately denied.
Version 7.2
Figure 6-36: Access List - Adding IP Address
Figure 6-37: Web & Telnet Access List Table
When deleting all the IP addresses, make sure that you delete the IP address
79
6. Web-Based Management
Mediant 4000 SBC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 4000b sbc

Table of Contents