AudioCodes Mediant 4000 SBC User Manual page 396


Multiple manipulation rules on the same SIP message

Apply conditions per rule - the condition can be on parts of the message or call's
parameters

Multiple manipulation rules using the same condition. The following figure shows a
configuration example where rules 1 and 2 ('Row Rule' configured to Use Previous
Condition) use the condition configured for rule 0 ('Row Rule' configured to Use
Current Condition). For more information, see the description of the 'Row Rule'
parameter in this section.
Figure 19-1: Configuration Example of Message Manipulation Rules using Same Condition
The figure below illustrates a SIP message manipulation example:
User's Manual
Figure 19-2: SIP Header Manipulation Example
396
Mediant 4000 SBC
Document #: LTRT-40203