AudioCodes Mediant 4000 SBC User Manual page 817

User's Manual
Parameter
auto-firmware
[AutoCmpFileUrl]
aupd-verify-cert
[AUPDVerifyCertificates]
[AUPDDigestUsername]
[AUPDDigestPassword]
crc-check regular
[AUPDCheckIfIniChanged]
Version 7.2

The variable tags are case-sensitive.

If you configure the parameter with the <CONF> variable tag, you
must reset the device with a save-to-flash for your settings to take
effect.

The tags can be defined in any order.

The tags must be defined adjacent to one another (i.e., no
spaces).
Defines the filename and path (URL) to the provisioning server from
where the software file (.cmp) can be downloaded, based on
timestamp for the Automatic Updated mechanism.
The valid value is an IP address in dotted-decimal notation or an
FQDN.
Determines whether the Automatic Update mechanism verifies the
TLS certificate received from the provisioning server when the
connection is HTTPS.

[0] = Disable (default)

[1] = Enables TLS certificate verification when the connection with
the provisioning server is based on HTTPS. The device verifies
the authentication of the certificate received from the provisioning
server. The device authenticates the certificate against its trusted
root certificate store (see ''Configuring SSL/TLS Certificates'' on
page 103) and if ok, allows communication with the provisioning
server. If authentication fails, the device denies communication
(i.e., handshake fails).
Defines the username for digest (MD5 cryptographic hashing) access
authentication with the HTTP server used for the Automatic Update
feature.
The valid value is a string of up to 50 characters. By default, no value
is defined.
Defines the password for digest (MD5 cryptographic hashing) access
authentication with the HTTP server used for the Automatic Update
feature.
The valid value is a string of up to 50 characters. By default, no value
is defined.
Enables the device to perform cyclic redundancy checks (CRC) on
downloaded configuration files (ini) during the Automatic Update
process. The CRC checks whether the content (raw data) of the
downloaded file is different to the content of the previously
downloaded file from the previous Automatic Update process. The
device compares the CRC check value (code) result with the check
value of the previously downloaded file. If the check values are
identical, it indicates that the file has no new configuration settings,
and the device discards the file. If the check values are different, the
device installs the downloaded file and applies the new configuration
settings.

[0] = (Default) Disable - the device does not perform CRC and
installs the downloaded file regardless.

[1] = Enable CRC for the entire file, including line order (i.e., same
text must be on the same lines). If there are differences between
the files, the device installs the downloaded file. If there are no
817
60. Configuration Parameters Reference
Description
Mediant 4000 SBC