AudioCodes Mediant 4000 SBC User Manual page 744

2. Click New; the following dialog box appears:
Figure 52-5: SBC CDR Format Table - Add Dialog Box
3. Configure the CDR according to the parameters described in the table below.
4. Click Apply.
Examples of configured CDR customization rules are shown below:
Figure 52-6: Examples of SBC CDR Customization Rules
Table 52-5: SBC CDR Format Table Parameter Descriptions
Parameter
Index
[SBCCDRFormat_Index]
CDR Type
cdr-type
[SBCCDRFormat_CDRType]
Field Type
col-type
[SBCCDRFormat_FieldType]
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the application type for which you want to customize CDRs.

[1] Syslog SBC = (Default) Customizes CDR fields for SIP
signaling-related CDRs sent in Syslog messages.

[3] Syslog Media = Customizes CDR fields for media-related
CDRs sent in Syslog messages.

[5] Local Storage SBC = Customizes CDR fields that are stored
locally on the device. Only signaling-related CDRs are stored
locally on the device.

[7] RADIUS SBC = Customizes CDR fields (i.e., RADIUS
Attributes) for CDRs sent in RADIUS accounting request
messages.
Defines the CDR field (column) that you want to customize. The
applicable CDR field depends on the settings of the 'CDR Type'
parameter:

For all types: [300] CDR Type (default); [301] Call ID; [302]
Session ID; [303] Report Type; [304] Media Type; [305]
Accounting Status Type; [306] H323 ID; [307] RADIUS Call ID;
744
Mediant 4000 SBC
Description
Document #: LTRT-40203