Configuring Proxy Sets - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter
[IPGroup_MethodList]
Username
username
[IPGroup_Username]
Password
password
IPGroup_Password]
GW Group Status
GW Group Registered IP
Address
GW Group Registered
Status
17.5

Configuring Proxy Sets

The Proxy Sets table lets you configure up to 625 Proxy Sets. A Proxy Set defines the
address and transport type (e.g., UDP or TCP) of a SIP server (e.g., SIP proxy and SIP
registrar server). The Proxy Set represents the destination (address) of the IP Group
configuration entity. Each Proxy Set can be configured with up to 10 addresses configured
as an IP address and/or DNS host name (FQDN), enabling you to implement load
balancing and redundancy (Proxy Hot-Swap feature) between multiple servers. Each Proxy
Set can be assigned a specific SSL/TLS certificate the (TLS Context), enabling you to use
different TLS certificates per SIP entity (IP Group). In addition, each Proxy Set must be
Version 7.2
methods.
By default, no value is defined. To define multiple SIP methods, use
the backslash ( \ ) to separate each method (e.g., INVITE\REGISTER).
Note: The parameter is applicable only if the 'Authentication Mode'
parameter is set to SBC as Server [2].
Defines the shared username for authenticating the IP Group, when
the device acts as an Authentication server.
The valid value is a string of up to 51 characters. By default, no
username is defined.
Note:

The parameter is applicable only to Server-type IP Groups and
when the 'Authentication Mode' parameter is set to SBC as Server
(i.e., authentication of servers).

To specify the SIP request types (e.g., INVITE) that must be
challenged by the device, use the 'Authentication Method List'
parameter.
Defines the shared password for authenticating the IP Group, when
the device acts as an Authentication server.
The valid value is a string of up to 51 characters. By default, no
password is defined.
Note:

The parameter is applicable only to Server-type IP Groups and
when the 'Authentication Mode' parameter is set to SBC as Server
(i.e., authentication of servers).

To specify the SIP request types (e.g., INVITE) that must be
challenged by the device, use the 'Authentication Method List'
parameter.
(Read-only field) Displays the IP address of the IP Group entity
(gateway) if registered with the device; otherwise, the field is blank.
Note: The field is applicable only to Gateway-type IP Groups (i.e., the
'Type' parameter is configured to Gateway).
(Read-only field) Displays whether the IP Group entity (gateway) is
registered with the device ("Registered" or "Not Registered").
Note: The field is applicable only to Gateway-type IP Groups (i.e., the
'Type' parameter is configured to Gateway).
363
Description
17. Control Network
Mediant 4000 SBC