AudioCodes Mediant 4000 SBC User Manual page 536

Parameter
Source Host
src-host
[IPOutboundManipulation_SrcHost]
Source Tags
src-tags
[IPOutboundManipulation_SrcTags]
Destination Username Prefix
dst-user-name-prefix
[IPOutboundManipulation_DestUser
namePrefix]
Destination Host
dst-host
[IPOutboundManipulation_DestHost]
Destination Tags
dest-tags
[IPOutboundManipulation_DestTags]
User's Manual
digits. For available notations, see ''Dialing Plan Notation for
Routing and Manipulation'' on page 799.
Note: If you need to manipulate calls of many different source
URI user names, you can use tags (see 'Source Tags'
parameter below) instead of this parameter.
Defines the source SIP URI host name - full name, typically in
the From header.
The default value is the asterisk (*) symbol (i.e., any source
host name).
Assigns a prefix tag to denote source URI user names
corresponding to the tag configured in the associated Dial
Plan.
The valid value is a string of up to 20 characters. The tag is
case insensitive.
To configure prefix tags, see ''Configuring Dial Plans'' on page
541.
Note:

Make sure that you assign the Dial Plan in which you have
configured the prefix tag, to the related IP Group or SRD.

Instead of using tags and configuring the parameter, you
can use the 'Source Username Prefix' parameter to specify
a specific URI source user or all source users.
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination username prefix). The prefix can be a single digit
or a range of digits. For available notations, see ''Dialing Plan
Notation for Routing and Manipulation'' on page 799.
Note: If you need to manipulate calls of many different
destination URI user names, you can use tags (see
'Destination Tags' parameter below) instead of this parameter.
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination host name).
Assigns a prefix tag to denote destination URI user names
corresponding to the tag configured in the associated Dial
Plan.
The valid value is a string of up to 20 characters. The tag is
case insensitive.
To configure prefix tags, see ''Configuring Dial Plans'' on page
541.
Note:

Make sure that you assign the Dial Plan in which you have
configured the prefix tag, to the related IP Group or SRD.

Instead of using tags and configuring the parameter, you
can use the 'Destination Username Prefix' parameter to
specify a specific URI destination user or all destinations
users.
536
Mediant 4000 SBC
Description
Document #: LTRT-40203