Name
Type
SBC Advanced
Tags
•
IP Group for the second IP PBX ("Type" and "Port" tags are later used to identify
the IP PBX and assign it a local UDP port 6002 on the leg interfacing with the
proxy server):
General
Index
Name
Type
SBC Advanced
Tags
•
IP Group for the third IP PBX ("Type" and "Port" tags are later used to identify the
IP PBX and assign it a local UDP port 6003 on the leg interfacing with the proxy
server):
General
Index
Name
Type
SBC Advanced
Tags
•
IP Group for the proxy server ("Type" tag is later used to identify proxy server):
General
Index
Name
Type
SBC Advanced
Tags
3.
Open the Call Setup Rules table (see Configuring Call Setup Rules on page 386), and
then configure the following Call Setup rules:
•
Uses the value of the "Type" tag name, configured in the IP Group's 'Tags'
parameter, as the source tag:
General
Index
Rule Set ID
User's Manual
PBX-1
Server
Type=PBX;Port=6001
2
PBX-2
Server
Type=PBX;Port=6002
3
PBX-3
Server
Type=PBX;Port=6003
4
ITSP
Server
Type=ITSP
1
1
514
Mediant 4000 SBC
Document #: LTRT-40203