Customizing Cdrs For Sbc Calls And Test Calls - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 51 Reporting Information to External Party
Field
Trunk Group
ID
[503]
Was Call
Started
[415]
Coder
Transcoding
[635]

Customizing CDRs for SBC Calls and Test Calls

The SBC CDR Format table lets you customize CDRs for SBC calls and CDRs for Test Calls that
are generated by the device for the following CDR types:
■ CDRs (media and SIP signaling) sent in Syslog messages. For CDRs sent in Syslog
messages, you can customize the name of the CDR field. You can configure up to 128 Syslog
CDR customization rules.
Displays the Trunk Group ID (integer).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "TG".
■ The maximum number of characters for Syslog tabular alignment is 5.
Displays whether the call was started or not (i.e., whether a "CALL_START"
CDR Report was generated).
■ "0": No INVITE was sent to the IP side for the Tel-to-IP call, or no Setup
message was sent to the Tel side for the IP-to-Tel call. Note that the first
"CALL_START" CDR report type of a new signaling leg has value "0".
■ "1": The call was started – an INVITE was sent to the IP side for the Tel-to-
IP call, or a Setup message was sent to the Tel side for the IP-to-Tel call.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The field is applicable only to Syslog, RADIUS, and Local Storage.
■ The maximum number of characters for Syslog tabular alignment is 5.
Displays whether there was coder transcoding for the SBC call. The field is a
string:
■ "TRANSCODING"
■ "NO_TRANSCODING"
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable only to "MEDIA_END" CDR Report Types.
■ The field is applicable only to SBC media CDRs.
■ The field is applicable only to Syslog and RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 17.
- 799 -
Mediant 4000 SBC | User's Manual
Description