AudioCodes Mediant 4000 SBC User Manual page 855

User's Manual
Parameter
Registrar Parameters
Registration Time
configure voip > sip-definition
proxy-and-registration >
registration-time
[RegistrationTime]
Re-registration Timing [%]
configure voip > sip-definition
settings > re-registration-timing
[RegistrationTimeDivider]
Registration Retry Time
configure voip > sip-definition
settings > registration-retry-time
[RegistrationRetryTime]
Max Registration Backoff Time
configure voip > sip-
definition proxy-and-
registration > max-
registration-backoff-time
[MaxRegistrationBackoffTime]
Version 7.2
ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRDName,
ProxySet_ClassificationInput, ProxySet_TLSContextName,
ProxySet_ProxyRedundancyMode,
ProxySet_DNSResolveMethod, ProxySet_KeepAliveFailureResp,
ProxySet_GWIPv4SIPInterfaceName,
ProxySet_SBCIPv4SIPInterfaceName,
ProxySet_GWIPv6SIPInterfaceName,
ProxySet_SBCIPv6SIPInterfaceName,
ProxySet_MinActiveServersLB,
ProxySet_SuccessDetectionRetries,
ProxySet_SuccessDetectionInterval,
ProxySet_FailureDetectionRetransmissions;
[ \ProxySet ]
For more information, see ''Configuring Proxy Sets'' on page 363.
Defines the time interval (in seconds) for registering to a Proxy
server. The value is used in the SIP Expires header. The
parameter also defines the time interval between Keep-Alive
messages when the parameter EnableProxyKeepAlive is set to 2
(REGISTER).
Typically, the device registers every 3,600 sec (i.e., one hour).
The device resumes registration according to the parameter
RegistrationTimeDivider.
The valid range is 10 to 2,000,000. The default is 180.
Defines the re-registration timing (in percentage). The timing is a
percentage of the re-register timing set by the Registrar server.
The valid range is 50 to 100. The default is 50.
For example: If the parameter is set to 70% and the Registration
Expires time is 3600, the device re-sends its registration request
after 3600 x 70% (i.e., 2520 sec).
Note:

The parameter may be overridden if the parameter
RegistrationTimeThreshold is greater than 0.
Defines the time interval (in seconds) after which a registration
request is re-sent if registration fails with a 4xx response or if
there is no response from the Proxy/Registrar server.
The default is 30 seconds. The range is 10 to 3600.
Note: Registration retry time can also be configured with the
MaxRegistrationBackoffTime parameter.
Defines a dynamic time-to-wait interval before the device
attempts to register the SIP entity again after a registration failure.
The parameter is applicable only to registrations initiated by the
device on behalf of SIP entities (for example, User Info, Accounts,
Endpoints or the device itself) with a SIP proxy server (registrar).
The valid value is 0 to 3000000 (i.e., 3 million seconds). The
default is 0 (i.e., disabled).
In contrast to the RegistrationRetryTime parameter, which defines
855
60. Configuration Parameters Reference
Description
Mediant 4000 SBC