AudioCodes Mediant 4000 SBC User Manual page 902

Parameter
SBC Fax Detection Timeout
configure voip > sbc settings > sbc-fax-
detection-timeout
[SBCFaxDetectionTimeout]
Admission Control Table
Admission Control
configure voip > sbc sbc-admission-control
[SBCAdmissionControl]
Allowed Audio Coders Table
Allowed Audio Coders
configure voip > coders-and-profiles allowed-
audio-coders <group index > coder index>
[AllowedAudioCoders]
Allowed Audio Coders Groups Table
Allowed Audio Coders Groups
User's Manual
Description
Request-URI, Contact, From, To, P-Asserted, P-
Preferred, and Route headers.
Defines the duration (in seconds) for which the device
attempts to detect fax (CNG tone) immediately upon
the establishment of a voice session. The interval
starts from the establishment of the voice call.
The valid value is 1 to any integer. The default is 10.
The feature applies to faxes that are sent immediately
after the voice channel is established (i.e., after 200
OK).
You can configure the handling of fax negotiation by
the device for specific calls, using IP Profiles
configured in the IP Profiles table (see the
IpProfile_SBCRemoteRenegotiateOnFaxDetection
parameter in Configuring IP Profiles on page 418).
Defines Call Admission Control (CAC) rules.
The format of the ini file table parameter is as follows:
[SBCAdmissionControl]
FORMAT SBCAdmissionControl_Index =
SBCAdmissionControl_AdmissionControlName,
SBCAdmissionControl_LimitType,
SBCAdmissionControl_IPGroupName,
SBCAdmissionControl_SRDName,
SBCAdmissionControl_SIPInterfaceName,
SBCAdmissionControl_RequestType,
SBCAdmissionControl_RequestDirection,
SBCAdmissionControl_Limit,
SBCAdmissionControl_LimitPerUser,
SBCAdmissionControl_Rate,
SBCAdmissionControl_MaxBurst,
SBCAdmissionControl_Reservation;
[\SBCAdmissionControl]
For more information, see ''Configuring Admission
Control'' on page 487.
Defines audio coders for the Allowed Audio Coders
Group.
The format of the ini file table parameter is as follows:
[ AllowedAudioCoders ]
FORMAT AllowedAudioCoders_Index =
AllowedAudioCoders_AllowedAudioCodersGroupNam
e, AllowedAudioCoders_AllowedAudioCodersIndex,
AllowedAudioCoders_CoderID,
AllowedAudioCoders_UserDefineCoder;
[ \AllowedAudioCoders ]
For more information, see ''Configuring Allowed Audio
Coder Groups'' on page 414.
Defines the index and name of the Allowed Audio
902
Mediant 4000 SBC
Document #: LTRT-40203