AudioCodes Mediant 4000 SBC User Manual page 813

User's Manual
Parameter
x]
Trap User
trap-user
[SNMPManagerTrapUser_x]
Trap Manager Host Name
manager-host-name
[SNMPTrapManagerHostName]
Activity Trap
configure troubleshoot > activity-trap
[EnableActivityTrap]
SNMP Community String Parameters
Read Only Community Strings
configure system > snmp settings >
ro-community-string
[SNMPReadOnlyCommunityString_x]
Read/Write Community Strings
configure system > snmp settings >
rw-community-string
[SNMPReadWriteCommunityString_x
]
Trap Community String
configure system > snmp trap >
community-string
[SNMPTrapCommunityString]
SNMP Trusted Managers Table
SNMP Trusted Managers
configure system > snmp settings >
trusted-managers
[SNMPTrustedMgr_x]
SNMP V3 Users Table
SNMP V3 Users
configure system > snmp v3-users
[SNMPUsers]
Version 7.2
60. Configuration Parameters Reference

[1] Enable = (Default) Sending is enabled.
Defines the SNMPv3 USM user or SNMPv2 user to associate
with the trap destination. This determines the trap format,
authentication level, and encryption level. By default, it is
associated with the SNMPv2 user (SNMP trap community
string).
The valid value is a string.
Defines an FQDN of the remote host used as an SNMP
manager to receive traps sent by the device. The device
sends the traps to the DNS-resolved IP address.
The valid range is a string of up to 99 characters.
For more information, see ''Configuring an SNMP Trap
Destination with FQDN'' on page 91.
Enables the device to send an SNMP trap to notify of Web
user activities in the Web interface. The activities to report are
configured by the ActivityListToLog parameter.

[0] Disable (default)

[1] Enable
Defines a read-only SNMP community string. Up to five read-
only community strings can be configured.
For more information, see Configuring SNMP Community
Strings on page 87.
Defines a read-write SNMP community string. Up to five read-
write community strings can be configured.
For more information, see Configuring SNMP Community
Strings on page 87.
Defines the community string for SNMP traps.
For more information, see Configuring SNMP Community
Strings on page 87.
The table defines up to five IP addresses of remote trusted
SNMP managers from which the SNMP agent accepts and
processes SNMP Get and Set requests.
For more information, see ''Configuring SNMP Trusted
Managers'' on page 91.
The table defines SNMP v3 users.
The format of the ini file table parameter is:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
813
Description
Mediant 4000 SBC