AudioCodes Mediant 4000 SBC User Manual page 849

User's Manual
Parameter
QoE TLS Context Name
configure voip > qoe
settings > tls-context-
name
[QoETLSContextName]
QoE Report Mode
report-mode
[QoeReportMode]
Quality of Experience Profile Table
Quality of Experience
Profile
configure voip > qoe qoe-
profile
[QOEProfile]
Quality of Experience Color Rules Table
Quality of Experience
Color Rules
configure voip > qoe qoe-
color-rules
[QOEColorRules]
Bandwidth Profile Table
Bandwidth Profile
configure voip > qoe bw-
profile
[BWProfile]
Version 7.2
Selects a TLS Context (configured in the TLS Contexts table) for the TLS
connection with the OVOC server.
The valid value is a string representing the name of the TLS Context as
configured in the 'Name' field of the TLS Contexts table. The default is
the default TLS Context (ID 0).
Defines at what stage of the call the device sends the QoE data of the
call to the OVOC server.

[0] Report QoE During Call (default)

[1] Report QoE at End of Call
Note: If a QoE traffic overflow between OVOC and the device occurs,
the device sends the QoE data only at the end of the call, regardless of
the settings of the parameter.
The table defines Quality of Experience Profiles.
The format of the ini file table parameter is as follows:
[QOEProfile]
FORMAT QOEProfile_Index = QOEProfile_Name,
QOEProfile_SensitivityLevel;
[\QOEProfile]
For more information, see ''Configuring Quality of Experience Profiles''
on page 311.
The table defines Quality of Experience Color Rules.
The format of the ini file table parameter is as follows:
[QOEColorRules]
FORMAT QOEColorRules_Index = QOEColorRules_QoeProfile,
QOEColorRules_ColorRuleIndex, QOEColorRules_monitoredParam,
QOEColorRules_direction, QOEColorRules_profile,
QOEColorRules_MinorThreshold, QOEColorRules_MinorHysteresis,
QOEColorRules_MajorThreshold, QOEColorRules_MajorHysteresis;
[\QOEColorRules]
For more information, see ''Configuring Quality of Experience Profiles''
on page 311.
The table defines Bandwidth Profiles.
The format of the ini file table parameter is as follows:
[BWProfile]
FORMAT BWProfile_Index = BWProfile_Name,
BWProfile_EgressAudioBandwidth, BWProfile_IngressAudioBandwidth,
BWProfile_EgressVideoBandwidth, BWProfile_IngressVideoBandwidth,
BWProfile_TotalEgressBandwidth, BWProfile_TotalIngressBandwidth,
BWProfile_WarningThreshold, BWProfile_hysteresis,
BWProfile_GenerateAlarms;
[\BWProfile]
For more information, see ''Configuring Bandwidth Profiles'' on page 316.
Note: For the parameter to take effect, a device reset is required.
849
60. Configuration Parameters Reference
Description
Mediant 4000 SBC