AudioCodes Mediant 4000 SBC User Manual page 889

User's Manual
Parameter
configure voip > sbc settings > crp-gw-
fallback
[CRPGatewayFallback]
SBC-specific Parameters
Enable SBC
configure voip > application > enable-sbc
[EnableSBCApplication]
SBC and CRP Parameters
Unclassified Calls
configure voip > sbc settings > unclassified-
calls
[AllowUnclassifiedCalls]
SBC Max Call Duration
configure voip > sbc settings > sbc-mx-call-
duration
[SBCMaxCallDuration]
Version 7.2
60. Configuration Parameters Reference
Description
Enables fallback routing from the proxy server to the
Gateway (PSTN).

[0] = Disable (default)

[1] = Enable
Enables the Session Border Control (SBC)
application.

[0] Disable

[1] Enable (default)
Note:

For the parameter to take effect, a device reset is
required.

The parameter is enabled by default only if the
License Key contains at least one of the SBC-
related capacity features (e.g., "SBC-Signaling");
otherwise, the parameter is disabled.
Determines whether incoming calls that cannot be
classified (i.e. classification process fails) to a Source
IP Group are rejected or processed.

[0] Reject = (Default) Call is rejected if
classification fails.

[1] Allow = If classification fails, the incoming
packet is assigned to a source IP Group (and
subsequently processed) as follows:

The source SRD is determined according to
the SIP Interface to where the SIP-initiating
dialog request is sent. The source IP Group is
set to the default IP Group associated with this
SRD.

If the source SRD is ID 0, then source IP
Group ID 0 is chosen. In case of any other
SRD, then the first IP Group associated with
this SRD is chosen as the source IP Group or
the call. If no IP Group is associated with this
SRD, the call is rejected.
Defines the maximum duration (in minutes) per SBC
call (global). If the duration is reached, the device
terminates the call.
The valid range is 0 to 35,791, where 0 is unlimited
duration. The default is 0.
Note: You can also configure this functionality per
specific calls, using IP Profiles
(IpProfile_SBCMaxCallDuration). For a detailed
description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring
IP Profiles'' on page 418. If this functionality is
configured for a specific IP Profile, the settings of this
global parameter is ignored for calls associated with
the IP Profile.
889 Mediant 4000 SBC