AudioCodes Mediant 4000 SBC User Manual page 826

Parameter
[DhcpOption160Support]
[DHCPSpeedFactor]
DHCP Servers Table
DHCP Servers Table
configure network > dhcp
server <index>
[DhcpServer]
DHCP Vendor Class Table
DHCP Vendor Class table
configure network > dhcp-
server vendor-class
[DhcpVendorClass]
User's Manual
by a DHCP server.

[0] = DHCP Option 120 is not supported and ignored if received in the
DHCP response.

[1] = (Default) DHCP Option 120 is supported and if received, the
device adds the SIP server information to the Proxy Set.
Enables the use of DHCP Option 160.

[0] = (Default) Disable

[1] = Enable
For more information, see "Provisioning the Device using DHCP Option
160" on page 662.
Note: For the parameter to take effect, a device reset is required.
Defines the device's DHCP renewal speed for a leased IP address from
a DHCP server.

[0] = Disable

[1] = (Default) Normal

[2] to [10] = Fast
When set to 0, the DHCP lease renewal is disabled. Otherwise, the
renewal time is divided by this factor. Some DHCP-enabled routers
perform better when set to 4.
Note: For the parameter to take effect, a device reset is required.
Defines the device's embedded DHCP server.
The format of the ini file table parameter is as follows:
[ DhcpServer ]
FORMAT DhcpServer_Index = DhcpServer_InterfaceName,
DhcpServer_StartIPAddress, DhcpServer_EndIPAddress,
DhcpServer_SubnetMask, DhcpServer_LeaseTime,
DhcpServer_DNSServer1, DhcpServer_DNSServer2,
DhcpServer_NetbiosNameServer, DhcpServer_NetbiosNodeType,
DhcpServer_NTPServer1, DhcpServer_NTPServer2,
DhcpServer_TimeOffset, DhcpServer_TftpServer,
DhcpServer_BootFileName, DhcpServer_ExpandBootfileName,
DhcpServer_OverrideRouter, DhcpServer_SipServer,
DhcpServer_SipServerType;
[ \DhcpServer ]
For more information, see Configuring the Device's DHCP Server.
Defines Vendor Class Identifier (VCI) names (DHCP Option 60) for the
device's DHCP server. Only if the DHCPDiscover request message,
received from the DHCP client, contains this value does the device
provide DHCP services.
The format of the ini file table parameter is as follows:
[ DhcpVendorClass ]
FORMAT DhcpVendorClass_Index =
DhcpVendorClass_DhcpServerIndex,
DhcpVendorClass_VendorClassId;
[ \DhcpVendorClass ]
For more information, see Configuring the Vendor Class Identifier on
826
Description
Document #: LTRT-40203
Mediant 4000 SBC