Configuring Ip Profiles - AudioCodes Mediant 4000 SBC User Manual

6. Click New; the following dialog box appears:
Figure 20-7: Allowed Video Coders Table - Add Dialog Box
7. Configure coders for the Allowed Video Coders Group according to the parameters
described in the table below.
8. Click Apply.
Table 20-4: Allowed Video Coders Groups and Allowed Video Coders Tables Parameter
Parameter
Allowed Video Coders Groups Table
Index
allowed-video-coders-groups <index>
[AllowedVideoCodersGroups_Index]
Name
coders-group-name
[AllowedVideoCodersGroups_Name]
Allowed Video Coders Table
Index
allowed-video-coders <group index/coder index>
[AllowedVideoCoders_AllowedVideoCodersIndex]
User Define Coder
user-define-coder
[AllowedVideoCoders_UserDefineCoder]
20.4

Configuring IP Profiles

The IP Profiles table lets you configure up to 125 IP Profiles. An IP Profile is a set of
parameters with user-defined settings relating to signaling (e.g., SIP message terminations
such as REFER) and media (e.g., coder type). An IP Profile can later be assigned to
specific IP calls (inbound and/or outbound). Thus, IP Profiles provide high-level adaptation
when the device interworks between different IP entities, each of which may require
different handling by the device. This can include, for example, transcoding or even
User's Manual
Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique
name.
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
Defines a user-defined coder.
The valid value is a string of up to 24 characters
(case-insensitive). For example, "HD.123"
(without quotes).
Note: Each coder can be configured only once
per Allowed Video Coders Group.
418
Mediant 4000 SBC
Description
Document #: LTRT-40203