AudioCodes Mediant 4000 SBC User Manual page 314

Parameter
Sensitivity Level
sensitivity-level
[QOEProfile_SensitivityLevel]
5. In the Quality of Experience Profile table, select the row for which you want to
configure QoE thresholds, and then click the Quality of Experience Color Rules link
located below the table; the Quality of Experience Color Rules table appears.
6. Click New; the following dialog box appears:
Figure 16-4: Quality of Experience Color Rules Table - Dialog Box
7. Configure a rule according to the parameters described in the table below.
8. Click New, and then save your settings to flash memory.
Table 16-3: Quality of Experience Color Rules Table Parameter Descriptions
Parameter
General
Index
index
[QOEColorRules_ColorRuleIndex]
Monitored Parameter
monitored-parameter
[QOEColorRules_monitoredParam]
Direction
direction
[QOEColorRules_direction]
Sensitivity Level
sensitivity-level
User's Manual
Defines the pre-configured threshold profile to use.

[0] User Defined = Need to define thresholds per monitored
parameter in the Quality of Experience Color Rules table.

[1] Low = Pre-configured low sensitivity thresholds.

[2] Medium = (Default) Pre-configured medium sensitivity
thresholds.

[3] High = Pre-configured high sensitivity thresholds.
Reporting is done for small fluctuations in parameter values.
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the parameter to monitor and report.

[0] MOS (default)

[1] Delay

[2] Packet Loss

[3] Jitter

[4] RERL [Echo]
Defines the monitoring direction.

[0] Device Side (default)

[1] Remote Side
Defines the sensitivity level of the thresholds.

[0] User Defined = Need to define the thresholds in the
314
Mediant 4000 SBC
Description
Description
Document #: LTRT-40203