Services; Sip-Based Media Recording Parameters - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter
AMD Beep Detection Mode
configure voip > sip-definition
settings > amd-beep-detection
[AMDBeepDetectionMode]
Answer Machine Detector Beep
Detection Timeout
configure voip > media
ipmedia > amd-beep-
detection-timeout
[AMDBeepDetectionTimeout]
Answer Machine Detector Beep
Detection Sensitivity
configure voip > media
ipmedia > amd-beep-
detection-sensitivity
[AMDBeepDetectionSensitivity]
AMD mode
configure voip > sip-definition
settings > amd-mode
[AMDmode]

60.13 Services

60.13.1 SIP-based Media Recording Parameters

The SIP-based media recording parameters are described in the table below.
Parameter
SIP Recording Application
configure voip > sip-definition
sip-recording settings >
Version 7.2
The valid range is 1 to 30,000. The default is 2,000 (i.e., 2
seconds).
Determines the AMD beep detection mode. This mode detects
the beeps played at the end of an answering machine
message, by using the X-Detect header extension. The device
sends a SIP INFO message containing the field values
Type=AMD and SubType=Beep. This feature allows users of
certain third-party, Application server to leave a voice message
after an answering machine plays the "beep".

[0] Disabled (default)

[1] Start After AMD

[2] Start Immediately
Defines the AMD beep detection timeout (i.e., the duration that
the beep detector functions from when detection is initiated).
This is used for detecting beeps at the end of an answering
machine message.
The valid value is in units of 100 milliseconds, from 0 to 1638.
The default is 200 (i.e., 20 seconds).
Defines the AMD beep detection sensitivity for detecting beeps
at the end of an answering machine message.
The valid value is 0 to 3, where 0 (default) is the least sensitive.
Global parameter that enables the device to disconnect the IP-
to-Tel call upon detection of an answering machine on the Tel
side. You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_AmdMode). For a detailed
description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring IP
Profiles'' on page 418.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Table 60-41: SIP-based Media Recording Parameters
Enables the SIP-based Media Recording feature:

[0] Disable (default)

[1] Enable
60. Configuration Parameters Reference
Description
Description
911 Mediant 4000 SBC