AudioCodes Mediant 4000 SBC User Manual page 71

User's Manual

To configure management user accounts:
1. Open the Local Users table (Setup menu > Administration tab > Web & CLI folder >
Local Users).
2. Click New; the following dialog box is displayed:
3. Configure a user account according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Parameter
General
Index
[WebUsers_Index]
Username
user
[WebUsers_Username]
Password
password
[WebUsers_Password]
Version 7.2
Figure 6-30: Local Users Table - Dialog Box
Table 6-7: Local Users Table Parameter Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the Web user's username.
The valid value is a string of up to 40 alphanumeric characters,
including the period ".", underscore "_", and hyphen "-" signs.
Defines the Web user's password.
The valid value is a string of 8 to 40 ASCII characters. To ensure
strong passwords, adhere to the following password complexity
requirements:

Contain at least eight characters.

Contain at least two letters that are upper case (e.g., A).

Contain at least two letters that are lower case (e.g., a).

Contain at least two numbers (e.g., 4).

Contain at least two symbols (non-alphanumeric characters) (e.g.,
$, #, %).

No spaces.

Contain at least four new characters that were not used in the
previous password.
Note:

To enforce the password complexity requirements mentioned
above, configure the EnforcePasswordComplexity to 1.
Description
71
6. Web-Based Management
Mediant 4000 SBC