AudioCodes Mediant 4000 SBC User Manual page 751

User's Manual
VSAs are sent with a general RADIUS ID of 26 to indicate that they are vendor-
specific (non-standard). In addition, the company's registered vendor ID (as registered
with the Internet Assigned Numbers Authority or IANA) is also included in the packet.
The device's default vendor ID is 5003, which can be changed (see ''Configuring the
RADIUS Vendor ID'' on page 233). The VSA ID is also included in the packet.
Figure 52-12: Example of a Vendor-Specific Attribute
The following figure shows a vendor-specific RADIUS attribute collected by Wireshark.
The bottom pane shows the RADIUS attribute information as sent in the packet; the
upper pane is Wireshark's interpretation of the RADIUS information in a more
readable format. The example shows the attribute in string-of-characters format.
Figure 52-13: Example of Vendor-Specific RADIUS Attribute Collected by Wireshark
Note: You can customize the prefix title of the RADIUS attribute name and the ID. For
more information, see Customizing CDRs for SBC Calls on page 743.
To configure the address of the RADIUS Accounting server, see ''Configuring RADIUS
Servers'' on page 229. For all RADIUS-related configuration, see ''RADIUS-based
Services'' on page 229.
Version 7.2
52. Reporting Information to External Party
751 Mediant 4000 SBC