Supplementary Services - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter
configure voip > sbc dial-plan-
rule
[DialPlanRule]
Malicious Signature Table
Malicious Signature
configure voip > sbc malicious-
signature-database
[MaliciousSignatureDB]

60.11.1 Supplementary Services

The SBC and CRP supplementary services parameters are described in the table below.
Table 60-39: SBC and CRP Supplementary Services Parameters
Parameter
Emergency Call Preemption Parameters
For more information on SBC emergency call preemption, ''Configuring Call Preemption for SBC
Emergency Calls'' on page 561.
SBC Preemption Mode
configure voip > sbc settings >
sbc-preemption-mode
[SBCPreemptionMode]
Emergency Message Condition
configure voip > sbc settings >
sbc-emerg-condition
[SBCEmergencyCondition]
Emergency RTP DiffServ
configure voip > sbc settings >
sbc-emerg-rtp-diffserv
[SBCEmergencyRTPDiffServ]
Emergency Signaling DiffServ
configure voip > sbc settings >
sbc-emerg-sig-diffserv
[SBCEmergencySignalingDiffServ]
Version 7.2
For more information, see ''Configuring Dial Plans'' on
page 541.
Note:

The table is hidden in the ini file.

To configure Dial Plan rules from a file, see
''Importing and Exporting Dial Plans'' on page 546.
Defines the malicious signature patterns
The format of the ini file table parameter is as
follows:
[ MaliciousSignatureDB ]
FORMAT MaliciousSignatureDB_Index =
MaliciousSignatureDB_Name,
MaliciousSignatureDB_Pattern;
[ \MaliciousSignatureDB ]
For more information, see ''Configuring Malicious
Signatures'' on page 559.
Enables SBC emergency call preemption.

[0] Disable (default)

[1] Enable
Defines the index of the Message Condition rule in the Message
Conditions table that is used to identify emergency calls.
Note: The device applies the rule only after call classification
(but before inbound manipulation).
Defines DiffServ bits sent in the RTP for SBC emergency calls.
The valid value is 0 to 63. The default is 46.
Defines DiffServ bits sent in SIP signaling messages for SBC
emergency calls. This is included in the SIP Resource-Priority
header.
The valid value is 0 to 63. The default is 40.
907
60. Configuration Parameters Reference
Description
Description
Mediant 4000 SBC