AudioCodes Mediant 4000 SBC User Manual page 525

Session border controller

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

User's Manual

[IPGroupSet_Tags]

Select the IP Group Set row for which you want to assign IP Groups, and then click

the IP Group Set Member link located below the table; the IP Group Set Member

table appears.

Click New; the following dialog box appears:

Configure IP Group Set members according to the parameters described in the table

Click Apply, and then save your settings to flash memory.

[1] Random Weight = The device selects IP Groups at random and

their weights determine their probability of getting chosen over others.

The higher the weight, the more chance of the IP Group being

[2] Homing = The device always attempts to send all calls to the first

IP Group in the table (i.e., lowest index). If unavailable, it sends the

calls to the next consecutive, available IP Group. However, if the first

IP Group comes online again, the device selects it.

Note: For the Random Weight optional value, use the 'Weight'

parameter in the IP Group Set Member table (below) to configure weight

value per IP Group.

Assigns a Dial Plan tag that is used to determine whether the incoming

SIP dialog is sent to IP Groups belonging to this IP Group Set. The

parameter is used when IP-to-IP Routing rules are configured for

destination based on tags (i.e., 'Destination Type' parameter configured

to Destination Tag). For more information on routing based on

destination tags, see Using Dial Plan Tags for Routing Destinations on

Note: If the IP Groups belonging to the IP Group Set are also configured

with Dial Plan tags, the Dial Plan tag configured for the parameter takes

precedence. If the same Dial Plan tag is also configured for other IP

Groups in the IP Groups table, the IP Group Set takes precedence and

the device sends the SIP dialog to the IP Group(s) belonging to the IP

Figure 25-10: IP Group Set Member Table - Dialog Box

IP Group Set Member Table Parameter Descriptions

25. Routing SBC

Mediant 4000 SBC

Mediant 4000b sbc