User's Manual
Item #
1
Demarcation area of the topology. By default, the Topology view displays the following
names to represent the different demarcations of your voice configuration:
"WAN": Indicates the external network side
"LAN": Indicates the internal network (e.g., inside the Enterprise)
To modify a demarcation name, do the following:
Click the demarcation name; the name becomes editable in a text box, as shown in the
1
example below:
Type a name as desired, and then click anywhere outside of the text box to apply the
2
name.
You can use demarcation to visually separate your voice network to provide a clearer
understanding of your topology. This is especially useful for IP Groups, SIP Interfaces, and
Media Realms, where you can display them on the top or bottom border of the Topology
view (as shown in the figure below for callouts #1 and #2, respectively). For example, on
the top border you can position all entities relating to WAN, and on the bottom border all
entities relating to LAN.
By default, configuration entities are displayed on the bottom border. To define the
position, use the 'Topology Location' parameter when configuring the entity, where Down
is the bottom border and Up the top border:
2
Configured SIP Interfaces. Each SIP Interface is displayed using the following "SIP
Interface"-titled icon, which includes the name and row index number:
If you hover your mouse over the icon, a pop-up appears displaying the following basic
information (example):
Version 7.2
Table 17-8: Description of Topology View
Figure 17-12: Display Location in Topology View
Figure 17-13: Configuration Postion in Topology View
373
Description
17. Control Network
Mediant 4000 SBC