AudioCodes Mediant 4000 SBC User Manual page 93

User's Manual

To configure an SNMP v3 user:
1. Open the SNMPv3 Users table (Setup menu > Administration tab > SNMP folder >
SNMP V3 Users).
2. Click New; the following dialog box appears:
3. Configure the SNMP V3 parameters according to the table below.
4. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
Table 8-3: SNMPv3 Users Table Parameters Description
Parameter
Index
[SNMPUsers_Index]
User Name
username
[SNMPUsers_Username]
Authentication Protocol
auth-protocol
[SNMPUsers_AuthProtocol]
Privacy Protocol
priv-protocol
[SNMPUsers_PrivProtocol]
Authentication Key
Version 7.2
Figure 8-5: SNMPv3 Users Table - Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name of the SNMP v3 user. The name must be unique.
Authentication protocol of the SNMP v3 user.

[0] None (default)

[1] MD5

[2] SHA-1
Privacy protocol of the SNMP v3 user.

[0] None (default)

[1] DES

[2] 3DES

[3] AES-128

[4] AES-192

[5] AES-256
Authentication key. Keys can be entered in the form of a text password
Description
93
8. SNMP-Based Management
Mediant 4000 SBC