AudioCodes Mediant 4000 SBC User Manual page 503

User's Manual
2. Click New; the following dialog box appears:
3. Configure an IP-to-IP routing rule according to the parameters described in the table
below.
4. Click Apply.
Table 25-2: IP-to-IP Routing Table Parameter Descriptions
Parameter
Routing Policy
sbc-routing-policy-name
[IP2IPRouting_RoutingPoli
cyName]
General
Index
[IP2IPRouting_Index]
Name
route-name
[IP2IPRouting_RouteNam
e]
Alternative Route Options
alt-route-options
Version 7.2
Figure 25-5: IP-to-IP Routing Table - Add Dialog Box
Assigns a Routing Policy to the rule. The Routing Policy associates the
rule with an SRD(s). The Routing Policy also defines default LCR
settings as well as the LDAP servers used if the routing rule is based on
LDAP routing (and Call Setup Rules).
If only one Routing Policy is configured in the Routing Policies table, the
Routing Policy is automatically assigned. If multiple Routing Policies are
configured, no value is assigned.
To configure Routing Policies, see ''Configuring SBC Routing Policy
Rules'' on page 518.
Note: The parameter is mandatory.
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 40 characters. By default, no value is
defined.
Determines whether this routing rule is the main routing rule or an
alternative routing rule (to the rule defined directly above it in the table).

[0] Route Row = (Default) Main routing rule - the device first attempts
Description
503
25. Routing SBC
Mediant 4000 SBC