Cloning Srds - AudioCodes Mediant 4000 SBC User Manual

User's Manual
To facilitate multi-tenant configuration through CLI, you can access a specific tenant "view".
Once in a specific tenant view, all configuration commands apply only to the currently
viewed tenant. Only table rows (indexes) belonging to the viewed tenant can be modified.
New table rows are automatically associated with the viewed tenant (i.e., SRD name). The
display of tables and show running-configuration commands display only rows relevant to
the viewed tenant (and shared tenants). The show commands display only information
relevant to the viewed tenant. To support this CLI functionality, use the following
commands:

To access a specific tenant view:
# srd-view <SRD name>
Once accessed, the tenant's name (i.e., SRD name) forms part of the CLI prompt, for
example:
# srd-view datacenter
(srd-datacenter)#

To exit the tenant view:
# no srd-view

17.2.3 Cloning SRDs

You can clone (duplicate) existing SRDs. This is especially useful when operating in a
multi-tenant environment and you need to add new tenants (SRDs). The new tenants can
Version 7.2 339
17. Control Network
Mediant 4000 SBC