User's Manual
•
Retain the existing configuration (default): Select the 'Use existing
configuration' check box.
Figure 39-3: Load an INI File in the Software Upgrade Wizard
Note:
assigned default values (according to the .cmp file) and thereby, overwrite values
previously configured for these parameters.
10.
Click Reset; a progress bar is displayed, indicating the progress of saving the files to
flash and device reset.
Figure 39-4: Progress Bar Indicating Burning Files to Flash
Version 7.2
If you use the wizard to load an ini file, parameters excluded from the ini file are
657
39. Software Upgrade Wizard
Mediant 4000 SBC