AudioCodes Mediant 4000 SBC User Manual page 378

2. Click New; the following dialog box appears:
3. Configure an account according to the parameters described in the table below.
4. Click Apply.
Once you have configured Accounts, you can register or un-register them, as described
below:

To register or un-register an Account:
1. In the table, select the required Account entry row.
2. From the Action drop-down list, choose one of the following commands:
•
Register to register the Account.
•
Un-Register to un-register the Account.
To view Account registration status, see ''Viewing Registration Status'' on page 722.
Parameter
Served IP Group
served-ip-group-name
[Account_ServedIPGroupName]
General
Index
Application Type
application-type
User's Manual
Figure 18-1: Accounts Table - Add Dialog Box
Table 18-1: Accounts Table Parameter Descriptions
Defines the IP Group (e.g., IP-PBX) that you want to
register and/or authenticate upon its behalf.
Note: By default, all IP Groups are displayed. However, if
you filter the Web display by SRD (using the SRD Filter
box), only IP Groups associated with the filtered SRD are
displayed.
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Defines the application type:

Description
[2] SBC = SBC application.
378
Mediant 4000 SBC
Document #: LTRT-40203