AudioCodes Mediant 4000 SBC User Manual page 656

7. Click Load File; the device begins to install the .cmp file and a progress bar displays
the status of the loading process:
When the file is loaded, a message is displayed to inform you.
8. If your device is in HA mode, select one of the following upgrade options:
•
Hitless Upgrade (default)
•
System Reset Upgrade
See the description of these methods in the beginning of this section.
Note: If you select the Hitless Upgrade option, the wizard can only be used to upload
a .cmp file; Auxiliary and ini files cannot be uploaded.
9. To load additional files, use the Next and Back buttons to navigate through the wizard
to the desired file-load wizard page; otherwise, skip to the next step to load the .cmp
file only.
The wizard page for loading an ini file lets you do one of the following:
•
Load a new ini file:
a.
b.
•
Restore configuration to factory defaults: Clear the 'Use existing configuration'
check box.
User's Manual
Figure 39-2: CMP File Loading Progress Bar
Click Browse, and then navigate to and select the new ini file.
Click Load File; the device loads the ini file.
656
Mediant 4000 SBC
Document #: LTRT-40203