One Voip Interface For All Applications; Voip Interface Per Application Type - AudioCodes Mediant 4000 SBC User Manual

Session border controller

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

User's Manual

11.5.3.1 One VoIP Interface for All Applications

This example describes the configuration of a single VoIP interface for all applications:

IP Interfaces table: Configured with a single interface for OAMP, Media and Control:

Table 11-6: Example of Single VoIP Interface in IP Interfaces table

Static Routes table: Two routes are configured for directing traffic for subnet

201.201.0.0/16 to 192.168.11.10, and all traffic for subnet 202.202.0.0/16 to

192.168.11.1:

The NTP applications remain with their default application types.

This example describes the configuration of three VoIP interfaces - one for each

application type:

IP Interfaces table: Configured with three interfaces, each for a different application

type, i.e., one for OAMP, one for Call Control, and one for RTP Media, and each with

a different VLAN ID and default gateway:

Table 11-8: Example of VoIP Interfaces per Application Type in IP Interfaces table

Static Routes table: A routing rule is required to allow remote management from a

host in 176.85.49.0 / 24:

Table 11-7: Example of Static Routes Table

Prefix Length

200.200.85.14

211.211.85.14

Table 11-9: Example Static Routes Table

200.200.85.1

211.211.85.1

Prefix Length

192.168.11.10

192.168.11.1

ManagementIF

Mediant 4000 SBC

Mediant 4000b sbc