AudioCodes Mediant 4000 SBC User Manual page 286

2. Click New; the following dialog box appears:
Figure 15-55: HTTP Proxy Services Table - Add Dialog Box
3. Configure an HTTP Proxy service according to the parameters described in the table
below.
4. Click Apply, and then save your settings to flash memory.
Table 15-21: HTTP Proxy Services Table Parameter Descriptions
Parameter
Index
[HTTPProxyService_Index]
Name
service-name
[HTTPProxyService_ServiceName]
Listening Interface
listening-int
[HTTPProxyService_ListeningInterface]
URL Prefix
url-prefix
[HTTPProxyService_URLPrefix]
Keep-Alive Mode
User's Manual
Defines an index number for the new table row.
Note:

Each row must be configured with a unique index.

The parameter is mandatory.
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 40 characters. By default,
no value is defined.
Note:

Each row must be configured with a unique name.

The parameter is mandatory.
Assigns an HTTP Interface to the HTTP Proxy service. To
configure HTTP Interfaces, see ''Configuring HTTP
Interfaces'' on page 284.
Note: The parameter is mandatory.
Defines the URL prefix that is used to access the managed
equipment's embedded Web server. The URL prefix is
matched against the target of the HTTP requests sent by
the client (such as GET and POST). If a match is located in
the table, the device removes the prefix from the request
and then forwards the HTTP request to the managed
equipment without the prefix. For example, for the URL of
GET /home/index.html HTTP/1.1 (which is part of the URL
http://10.20.30.40/home/index.html), a URL prefix of
"/home" can be configured. To match all URLs, configure
the parameter to "/" (default).
Enables a keep-alive mechanism with the managed
286
Mediant 4000 SBC
Description
Document #: LTRT-40203