User's Manual
Parameter
Ethernet Output Name
device-name
[StaticRouteTable_DeviceName]
Gateway
gateway
[StaticRouteTable_Gateway]
Version 7.2
value of 0 to 64 for IPv6 interfaces.
Associates an IP network interface through which the static route's
Gateway is reached. The association is done by assigning the
parameter the same Ethernet Device that is assigned to the IP
network interface in the IP Interfaces table ('Ethernet Device'
parameter). To configure IP network interface, see Configuring IP
Network Interfaces on page 129. To configure Ethernet Devices,
see Configuring Underlying Ethernet Devices on page 127.
Defines the IP address of the Gateway (next hop) used for traffic
destined to the subnet/host defined in the 'Destination' / 'Prefix
Length' field.
Note:
The Gateway's address must be in the same subnet as the IP
address of the network interface that is associated with the
static route (using the 'Device Name' parameter - see above).
The IP network interface associated with the static route must
be of the same IP address family (IPv4 or IPv6).
139
Description
Mediant 4000 SBC
11. Network