Table of Contents
Advertisement
Feeder
This section describes the name and use of each part of the feeder.
Original set indicator
Lights up when originals are placed in the original supply tray.
Feeder cover
Open this cover when removing paper jammed in the feeder.
Slide guides
Adjust these guides according to the width of an original.
Original supply tray
Originals placed here are automatically fed into the feeder. When two or more sheets are loaded, originals
can be scanned continuously.
Document feed scanning area
Originals placed in the feeder are scanned in this area.
Platen glass
When scanning books, thick originals, thin originals, and other originals that cannot be scanned using the
feeder, place them on the platen glass.
Original output tray
Scanned originals are output here.
Basic Operations
Placing Originals(P. 130)
Placing Originals(P. 130)
104
Paper Jams in the Feeder(P. 699)
6C6U-021
Advertisement
Table of Contents
