Before Removing The Leakage Breaker; Removing The Electric Leak Breaker; Before Removing The Hvt1 Pcb (For Image Forming); Removing Hvt1 Pcb (For Image Forming) - Canon iR C3380 series Service Manual

[3] [1]
[3] [2]
10.5.11 Leakage Breaker

10.5.11.1 Before Removing the Leakage Breaker

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the rear upper cover. (page 10-14)[Detaching the Rear Upper
Cover]
2) Detach the rear lower cover. (page 10-15)[Detaching the Rear Lower
Cover]

10.5.11.2 Removing the Electric Leak Breaker

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove 4 fastons [1].
See the picture showing the colors of the cords connected to each faston. At-
tach the codes back exactly as is shown in the picture when restoring them.
[1]
[BK]
[WH]
[1]
2) Remove 2 screws [2] and remove the electric leak breaker.
[2] [4]
[3]
[2]
F-10-77
[1]
[BK]
[WH]
[1]
F-10-78
10.5.12 HV1 PCB
10.5.12.1 Before Removing the HVT1 PCB (for image
0014-2622
forming)
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the left cover. (page 10-14)[Detaching the Left Cover]

10.5.12.2 Removing HVT1 PCB (for image forming)

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
0014-2621
1) Remove the grip [1].
- 2 claws [2]
2) Remove HVT1 PCB assembly.
- 1 connector [1]
- 2 screws [2]
[2]
[3]
3) Remove the HTV1 cover [2].
- 4 screws {2}
Chapter 10
[3]
[2]
F-10-79
[2]
[1]
F-10-80
[1] [3]
F-10-81
0014-1281
0014-1283
10-23