4 Web-based Switch Configuration
Reboot Device
Select YES or NO to save the current settings before action. And click Reboot to restart the switch.
Configuration Backup and Restore
Offering the method to backup or restore the configuration settings via two protocols: HTTP or TFTP.
HTTP: Backup or restore the configuration file to or from the local drive.
Backup/Restore Config ID Number: Select config_id 1 or config_id 2.
Click Backup to save the current settings to the local drive.
Click Choose File to browse file inventories for a saved backup settings file.
Click Restore to execute restore configuration action
TFTP: TFTP (Trivial File Transfer Protocol) is a file transfer protocol that used to transfer files. Recently
system supports IPv4 address, IPv6 address and Domain Name string to be configured as TFTP server
address.
Click Backup to save the current settings to the TFTP server.
Click Restore to execute restore configuration action
Firmware Backup and Upgrade
Offering the method to upgrade or backup the system firmware via two protocols: HTTP or TFTP.
Figure 4.12 – Tool Menu > Reset System
Figure 4.13 – Tool Menu > Reboot Device
Figure 4.14 – Tool Menu > Configure Backup and Restore
Note: Switch will reboot after restore, and
all current configurations will be lost.
32
D-Link Smart Managed Switch User Manual