Reboot Schedule Settings; Sd Card Management; Sd Card Backup Settings - D-Link DGS-3130 Series Web Ui Reference Manual

Hide thumbs Also See for DGS-3130 Series:
Table of Contents

Advertisement

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

Reboot Schedule Settings

This window is used to display and configure the reboot schedule settings. Use this window to configure the reboot
schedule of the Switch. The reboot schedule must take effect within 30 days. After the reboot schedule has taken
effect and the Switch is restarted, it will generate a log message to identify that the Switch has been restarted using
the reboot schedule. After a reboot or a shutdown, the reboot schedule will be deleted automatically. If the Switch was
manually rebooted or powered off, before the reboot schedule could take effect, the specified reboot schedule will be
cancelled.
To view the following window, click Management > Reboot Schedule Settings, as shown below:
The fields that can be configured are described below:
Parameter
Time Interval
Time
Date
Save Before Reboot
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified reboot schedule.

SD Card Management

This section refers to the configuration associated with removable devices which includes USB driver storage.

SD Card Backup Settings

This window is used to display and configure the SD card backup settings. This is used to create or modify an SD card
management backup schedule entry.
Figure 4-87 Reboot Schedule Settings Window
Description
Select and enter the reboot schedule time interval value here. The reboot will
be initiated after the specified time interval has passed. The range is from 1 to
43200 minutes (30 days).
Select and enter the time at which the reboot should be initiated here. This time
uses the 24-hour format, for example, 21:30. If the date was not specified, the
reboot will be initiated when the system clock reaches the time specified within
the next 24 hours.
Select and enter the date at which the reboot should be initiated here. This date
uses the following format: DD/MM/YYYY. For example, 23/12/2015. The reboot
schedule can only be initiated within 30 days of configuration.
Select this option to save all configuration changes made before the reboot is
initiated.
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3130-30ts

Table of Contents