Reboot Schedule Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
NOTE: If the boot image file is damaged, the Switch will automatically use the backup image file in
the next boot up.
Click the Copy button to see the following window.
The fields that can be configured in Copy File are described below:
Parameter
Source
Destination
Click the Apply button to initiate the copy.
Click the Cancel button the discard the process.

Reboot Schedule Settings

This window is used to display and configure the reboot schedule settings. Use this window to configure the reboot
schedule of the Switch. The reboot schedule must take effect within 30 days. After the reboot schedule has taken
effect and the Switch is restarted, it will generate a log message to identify that the Switch has been restarted using
the reboot schedule. After a reboot or a shutdown, the reboot schedule will be deleted automatically. If the Switch was
manually rebooted or powered off, before the reboot schedule could take effect, the specified reboot schedule will be
cancelled.
To view the following window, click Management > Reboot Schedule Settings, as shown below:
Figure 4-29 File System (Copy) Window
Description
Select the type of source file that will be copied here. Options to choose from
are startup-config and Source File. Only after selecting the Source File
option can the source file path and filename be entered in the space provided.
Select the type of destination file that will be copied here. Options to choose
from are startup-config, running-config, and Destination File. Only after
selecting the Destination File option can the destination file path and filename
be entered in the space provided. Tick the Replace check box to replace the
current running configuration with the indicated configuration file.
Figure 4-30 Reboot Schedule Settings Window
50