Specifying An Access Control Method; Setting The Maximum Number Of Concurrent 802.1X Users On A Port - HP 6600 Security Configuration Manual

Step
1. Enter system
view.
2. Set the port
authorization
state in system
view or Ethernet
interface view.

Specifying an access control method

You can specify an access control method for one port in interface view, or for multiple ports in system
view. If different access control methods are specified for a port in system view and interface view, the
one specified later takes effect.
To specify the access control method:
Step
1. Enter system view.
2. Specify an access
control method in
system view or
Ethernet interface
view.
Setting the maximum number of concurrent 802.1X
users on a port
You can set the maximum number of concurrent 802.1X users for ports individually in interface view or in
bulk in system view. If different settings are configured for a port in both views, the setting configured later
takes effect.
To set the maximum number of concurrent 802.1X users on a port:
Step
1. Enter system view.
Command
system-view
•
In system view:
dot1x port-control { authorized-force | auto |
unauthorized-force } [ interface interface-list ]
•
In Ethernet interface view:
a. interface interface-type interface-number
b. dot1x port-control { authorized-force | auto |
unauthorized-force }
Command
system-view
•
In system view:
dot1x port-method { macbased |
portbased } [ interface interface-list ]
•
In Ethernet interface view:
a. interface interface-type
interface-number
b. dot1x port-method { macbased |
portbased }
Command
system-view
90
Remarks
N/A
By default, auto applies.
Remarks
N/A
By default, MAC-based access
control applies.
Remarks
N/A