Dldp Unidirectional-Shutdown; Dldp Work-Mode - HP 7500 Series High Availability Command Reference

# Reset DLDP state for all ports in port group 1.
<Sysname> system-view
[Sysname] port-group manual 1
[Sysname-port-group-manual-1] group-member gigabitethernet 1/0/49 to gigabitethernet
1/0/50
[Sysname-port-group-manual-1] dldp reset
Related commands
dldp enable
•
•

dldp unidirectional-shutdown

dldp unidirectional-shutdown
Use dldp unidirectional-shutdown to set the port shutdown mode.
Use undo dldp unidirectional-shutdown to restore the default.
Syntax
dldp unidirectional-shutdown { auto | manual }
undo dldp unidirectional-shutdown
Default
The port shutdown mode is auto mode.
Views
System view
Default command level
2: System level
Parameters
auto: Configures the port shutdown mode as auto mode. When a unidirectional link is detected, the port
involved is shut down by DLDP.
manual: Configures the port shutdown mode as manual mode. When a unidirectional link is detected,
DLDP generates logs and traps to prompt you to shut down the involved port instead of doing so
automatically.
Examples
# Set the port shutdown mode to auto mode.
<Sysname> system-view
[Sysname] dldp unidirectional-shutdown auto
Related commands

dldp work-mode

dldp work-mode
Use dldp work-mode to set the DLDP mode.
Use undo dldp work-mode to restore the default DLDP mode.
61