Dot1X Mandatory-Domain; Dot1X Max-User - HP MSR Series Command Reference Manual

dot1x mandatory-domain

Use dot1x mandatory-domain to specify a mandatory 802.1X authentication domain on a port.
Use undo dot1x mandatory-domain to remove the mandatory authentication domain.
Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
Default
No mandatory authentication domain is specified.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters.
Usage guidelines
When the system authenticates an 802.1X user trying to access a port, it selects an authentication
domain in the following order:
1. Mandatory domain.
2. ISP domain specified in the username.
3. Default ISP domain.
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on GigabitEthernet
2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] dot1x mandatory-domain my-domain
Related commands
display dot1x

dot1x max-user

Use dot1x max-user to set the maximum number of concurrent 802.1X users on a port.
Use undo dot1x max-user to restore the default.
Syntax
dot1x max-user user-number
undo dot1x max-user
Default
The maximum number of concurrent users on a port is 256.
123