Display Snmp-Agent Local-Engineid - HP MSR1003-8S Command Reference Manual

Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name in non-FIPS mode, and an
SNMPv3 group name for high encryption in FIPS mode. It is a case-sensitive string of 1 to 32 characters.
If no group is specified, this command displays information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonvolatile
ACL name: testacl
Table 32 Command output
Field
Group name
Security model
Readview
Writeview
Notifyview
Storage-type
ACL
ACL name
Related commands
snmp-agent group

display snmp-agent local-engineid

Use display snmp-agent local-engineid to display the local SNMP engine ID.
Syntax
display snmp-agent local-engineid
Description
SNMP group name.
Security model of the SNMP group:
•
authPriv—authentication with privacy.
•
authNoPriv—authentication without privacy.
•
noAuthNoPriv—no authentication, no privacy.
Security model of an SNMPv1 or SNMPv2c group can only be noAuthNoPriv.
Read-only MIB view accessible to the SNMP group.
Write MIB view accessible to the SNMP group.
Notify MIB view for the SNMP group. The SNMP users in the group can send notifications
only for the nodes in the notify MIB view.
Storage type, including volatile, nonvolatile, permanent, readOnly, and other (see
31).
Number of the ACL that controls the access of the NMSs in the SNMP group to the device.
This field appears only when an ACL is assigned to the SNMP group. It is exclusive with the
ACL name field.
Name of the ACL that controls the access of the NMSs in the SNMP group to the device.
This field appears only when an ACL is assigned to the SNMP group. It is exclusive with the
ACL field.
159
Table