Upgrading Pse Processing Software In Service; Displaying And Maintaining Poe - HP MSR Series Configuration Manual

Step
2. Apply the PoE profile to one or multiple PoE
interfaces.
To apply the PoE profile in interface view:
Step
1. Enter system view.
2. Enter PoE interface view.
3. Apply the PoE profile to the current PoE interface.

Upgrading PSE processing software in service

You can upgrade the PSE processing software in service in either of the following two modes:
Refresh mode—This mode enables you to update the PSE processing software without deleting it.
•
You can upgrade the PSE processing software in the refresh mode at the CLI.
• Full mode—This mode deletes the PSE processing software and reloads it. If the PSE processing
software is damaged (so you cannot execute any PoE commands), you can upgrade the PSE
processing software in full mode to restore the PSE function.
An in-service PSE processing software upgrade might be unexpectedly interrupted (for example, if an
error causes the device to reboot). If you cannot upgrade the PSE processing software in full mode after
a reboot, you can power off the device and restart it before you upgrade it in full mode again. After the
upgrade, restart the device manually to make the new PSE processing software take effect.
To upgrade the PSE processing software in service:
Step
1. Enter system view.
2. Upgrade the PSE processing software in service.

Displaying and maintaining PoE

Task
Display PSE information.
Display the power supply state
of the specified PoE interface.
Display power information for
PoE interfaces.
Command
apply poe-profile { index index | name profile-name }
interface interface-range
Command
system-view
interface interface-type interface-number
apply poe-profile { index index | name profile-name }
Command
system-view
poe update { full | refresh } filename pse pse-id
Command
display poe device [ | { begin | exclude |
include } regular-expression ]
display poe interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display poe interface power [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
161
Remarks
Available in any view.
Available in any view.
Available in any view.