The Led Run And Error Indicators Are Blinking Simultaneously Every 0.5 Seconds; Seconds; Other Errors (Without Led Indicators) - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
12.2.7 The LED RUN and ERROR Indicators are Blinking
Simultaneously Every 0.5 Seconds
The blinking happens when the firmware of the CPU module is being upgraded. If this happens once the power is
supplied to the CPU module, it means errors occurred during the previous firmware upgrade. Users need to upgrade the
firmware again or contact your point of purchase.
12.2.8 The RUN and ERROR LED Indicators are Blinking One After
Another Every 0.5 Seconds.
The blinking happens when the CPU module memory card is backing up, restoring, or saving.
If you are using AS218 Series CPU and without engaging any SD card, the RUN and LED indicators blinking indicates
the AIO firmware is being updated. If the blinking happens at the instant when the CPU is supplied with power, the
blinking means AIO firmware update failed and you need to update the firmware again. If you are not updating the AIO
firmware, the blinking indicates CPU error and you need to contact the local authorized distributors.

12.2.9 Other Errors (Without LED Indicators)

Error
Code
(16#)
0011 The PLC ID is incorrect.
0012 The PLC password is incorrect.
The PLC maximum password attempts
002D
exceeded.
The memories in the latched special
0050
auxiliary relays are abnormal.
The latched special data registers are
0051
abnormal.
The memories in the latched auxiliary
0052
relays are abnormal.
0054 The latched counters are abnormal.
The latched 32-bit counters are
0055
abnormal.
Description
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Solution
Check the PLC ID.
Check the PLC password.
Reset the CPU module or restore the CPU module
to its default settings.
1. Reset the CPU module or restore the CPU
module to its default settings, and then download
the program and the parameters again.
2. If the problem persists, contact the local
authorized distributors.
1. Reset the CPU module or restore the CPU
module to its default settings, and then download
the program and the parameters again.
2. If the problem persists, contact the local
authorized distributors.
1. Reset the CPU module or restore the CPU
module to its default settings, and then download
the program and the parameters again.
2. If the problem persists, contact the local
authorized distributors.
1. Reset the CPU module or restore the CPU
module to its default settings, and then download
the program and the parameters again.
2. If the problem persists, contact the local
authorized distributors.
1. Reset the CPU module or restore the CPU
module to its default settings, and then download
the program and the parameters again.
2. If the problem persists, contact the local
authorized distributors.
Flag Log
SM34 V
SM34 V
SM34 V
SM6 V
SM6 V
SM6 V
SM6 V
SM6 V