Keithley 4200-SCS Reference Manual page 1696

Appendix O: Advanced Applications
Add a new UTM to the "ivswitch" project
Open KITE and load the "ivswitch" project
1. From the desktop, open KITE by double-clicking the KITE icon.
2. Open the ivswitch project from the File menu.
The Project Navigator for the ivswitch project is shown in
test for the 4terminal-n-fet device.
Figure O-28
Project Navigator for "ivswitch" project
Add a new UTM
1. In the Project Navigator, single-click rdson to select it. This establishes the position for the
new UTM.
2. From the Project menu, select New User Test Module (see
3. In the Add New User Test Module (UTM) to Project window, type in the new name as
shown in
Navigator.
Figure O-29
Add new UTM
A. Select New User Test Module
O-20
Figure O-29B and click OK.
B. Type in "rdson10" and click OK
Return to Section Topics
Figure O-28. Notice that rdson is the last
Figure O-30 shows the new UTM added to the Project
Model 4200-SCS Reference Manual
Figure O-29A).
4200-901-01 Rev. S / May 2017