Keithley 4200-SCS Reference Manual page 1559

Model 4200-SCS Reference Manual
Figure I-36
PcWfr window
2.
3.
4.
Figure I-37
Unit of measure drop-down list box
4200-901-01 Rev. S / May 2017
Set units of measure (microns or mils).
Calculate the wafer diameter:
a. Move the pins to the left edge of the wafer.
b. Click Left button on the Setup Options window.
c. Repeat for the Top and Right edges of the wafer, clicking the respective buttons after
each movement.
d. Click the Calculate button.
Set units to either microns or mils from the unit of measure Units drop-down list box
I-37) located in Setup Options window
Return to
(Figure I-38).
Section Topics
Appendix I: Micromanipulator 8860 Prober
(Figure
I-19