Keithley 4200-SCS Reference Manual page 1542

Appendix I: Micromanipulator 8860 Prober
Required probe station software
The following six programs are used to configure and operate the 8860 prober with the Keithley
Instruments Model 4200-SCS (all are required):
NOTE:
• pcBridge: Used to configure the communications setup (icon located on the desktop)
• pcLaunch: Used to launch various wafer controls and utilities (icon located on the desktop)
• pcIndie: Used to probe multi-subsites per die (button located in pcLaunch window)
• pcWafer: Used to probe single subsites per die (button located in pcLaunch window)
Software versions
The following list contains the software versions used to verify the configuration of the 8860 prober
with the Model 4200-SCS:
Product Name:
Product Version:
Product Name:
Product Version:
Product Name:
Product Version:
Product Name:
Product Version:
Product Name:
Product Version:
Product Version:
I-2
To properly use the 8860 prober with the Model 4200-SCS, software programs
pcIndie and pcWafer (not included with standard prober software) are required.
Refer to the prober manufacturer, Micromanipulator, for availability.
pcbridge
2.0.2
pcIndie
2.0.7
pcLaunch
2.0.9
pcNav
2.0.8
pcWfr
2.0.8sProduct Name: pcRouter
2.0.9
Return to Section Topics
Model 4200-SCS Reference Manual
Appendix I
Micromanipulator 8860 Prober
4200-901-01 Rev. S / May 2017