Keithley 4200-SCS Reference Manual page 1538

Appendix H: Suss MicroTec PA-200 Prober
3. Save the configuration from the File menu (Keithley CONfiguration utility window)
H-46).
4. Exit KCON.
Figure H-46
KCON: Saving
KITE
Use KITE to load and run the probesubsites project using the new configuration file which will
allow you to execute the project for this prober.
NOTE:
1. Load the probesubsites project example from KITE
a. Run KITE.
b. Select Open Project from the File menu.
c. Open the folder
d. Select the project file probesites.kpr.
H-30
The following configuration is accomplished using the Model 4200-SCS computer.
c:\S4200\kiuser\Projects\_Miscellaneous\probesubsites.
Return to Section Topics
Model 4200-SCS Reference Manual
(Figure H-47):
4200-901-01 Rev. S / May 2017
(Figure